Requirements for Quality Assurance Definition | Law Insider
-
Quality Assurance means a systematic procedure for assessing the effectiveness, efficiency, and appropriateness of services.
-
Quality Assurance Plan means a plan approved by the board for ongoing monitoring, measuring, evaluating, and, if necessary, improving the performance of a pharmacy function or system.
-
Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.
-
Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.
-
General air quality operating permit or “general permit” means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.
-
Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).
-
High-quality waters means all state waters, except:
-
Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.
-
National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.
-
PJM Reliability Assurance Agreement means that certain Reliability Assurance Agreement Among Load Serving Entities in the PJM Region, on file with FERC as PJM Interconnection L.L.C. Rate Schedule FERC No. 44, and as amended from time to time thereafter. Schedule of Work:
-
Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.
-
Water quality means the physical characteristics of water within shoreline jurisdiction, including water quantity, hydrological, physical, chemical, aesthetic, recreation-related, and biological characteristics. Where used in this chapter, the term “water quantity” refers only to development and uses regulated under this chapter and affecting water quantity, such as impermeable surfaces and storm water handling practices. Water quantity, for purposes of this chapter, does not mean the withdrawal of ground water or diversion of surface water pursuant to RCW 90.03.250 through 90.03.340.
-
Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.
-
Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.
-
Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;
-
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
-
health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;
-
Participating Certified Clinical Nurse Specialist means a Certified Clinical Nurse Specialist who has a written agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan to provide services to you at the time services are rendered.
-
Labor compliance agreement means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters.
-
Program Requirements means that the Partner has to fulfill certain minimum program entry requirements as well as ongoing program requirements, some of which are general PartnerEdge requirements, some of which are specific for the “Run Engagement”, including, without limitation payment of the Program Fee(s), meeting certain minimum annual revenue requirements, upholding a Run Authorization for at least one Product Family available for the “Run Engagement” and other requirements as set out in detail in the PartnerEdge Program Guide and the RSPI.
-
service delivery and budget implementation plan means a detailed plan approved by the executive mayor of a municipality in terms of section 53(l)(c)(ii) of the MFMA for implementing the municipality’s delivery of municipal services and its annual budget, and which must indicate
-
Safety Management Certificate has the meaning given to it in the ISM Code.
-
Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.
-
Peer support specialist means an individual who has experienced a severe and persistent mental illness and who has successfully completed standardized training to provide peer support services through the medical assistance program or the Iowa Behavioral Health Care Plan.
-
Environmental and Social Management Framework and “ESMF” means the Recipient’s framework dated November 30, 2010, which: (i) sets forth standards, methods and procedures specifying how technological research activities under the Project whose location, number and scale are presently unknown shall systematically address environmental and social issues in the screening and categorization, sitting, design, implementation and monitoring phases during Project implementation; (ii) systematizes the environmental and social impact assessment required for such activities before Project execution; and (iii) stipulates the procedures for conducting site-specific environmental impact assessments, be they limited environmental impact assessments or full environmental impact assessment.
-
State minimum standards means minimum requirements
Construction engineering and inspection work includes all items necessary for providing quality assurance and quality control in accordance with VDOT’s Minimum Requirements for Quality Assurance and Quality Control for Design-Build and Public-Private Transportation Act Projects, revised July 2018.
Throughout all sample collection and analysis activities, the permittee must use the EPA-approved QA/QC and chain-of-custody procedures described in:(1) EPA Requirements for Quality Assurance Project Plans EPA-QA/R-5 (EPA/240/B-01/003, March 2001).
Construction engineering and inspection work includes all items necessary for providing quality assurance and quality control in accordance with VDOT’s Minimum Requirements for Quality Assurance and Quality Control for Design-Build and Public-Private Transportation Act Projects, revised January 2012.
The QAPP should be prepared in accordance with EPA QA/R-5: EPA Requirements for Quality Assurance Project Plans.
Throughout all sample collection and analysis activities, the permittee must use the EPA-approved QA/QC and chain-of-custody procedures described in Requirements for Quality Assurance Project Plans (EPA/QA/R-5) and Guidance for Quality Assurance Project Plans (EPA/QA/G-5).
Throughout all sample collection and analysis activities, the permittee must use the EPA-approved QA/QC and chain-of-custody procedures described in EPA Requirements for Quality Assurance Project Plans (EPA/QA/R-5) and Guidance for Quality Assurance Project Plans (EPA/QA/G-5).